Inspect Your INFINITI Tires Monthly
We recommend monthly tire inspections so that you can be sure your tires are in good condition for the roads of Mount Laurel and Maple Shade. All it takes is just ten minutes. Here’s how to get started.
Check your tire pressure manually even if your car features a Tire Pressure Monitoring System. For the most accurate reading, try to wait a few hours after you last drove the vehicle. If your tire pressure is a little low, add air gradually until they are fully inflated.
After you have your tire pressure readings, inspect your tires for damage and wear. This could include gashes, embedded objects, or uneven wear patterns. If you notice uneven wear patterns, it is often a warning sign of overinflated tires, misaligned wheels, or suspension issues.
How to Check INFINITI Tire Tread
Grab a penny and learn how to check INFINITI tire tread in just a few simple steps:
- Place your penny into a tread groove upside down.
- Look at the part of the penny that is showing. Is the top of Lincoln’s head visible? This indicates that your tires do not have enough tread depth to be considered safe for driving. They should be replaced as soon as possible.
- Repeat the penny test on all tires and in several locations on each tire.
Additional Tire Care Services
Our service experts can also take care of these tasks:
- Rotate and Balance Tires – Every 5,000 to 7,000 miles
- Wheel Alignment – Every 7,000 miles
INFINITI Tire PSI Guide
The recommended INFINITI tire pressure ranges from 29 PSI to 45 PSI on most models. Because of this substantial range, we recommend looking at your owner’s manual for exact figures. This info may also be found on the sticker located on the inside edge of your driver’s door.
Schedule INFINITI Tire Maintenance with Holman INFINITI
INFINITI tire maintenance is simple and straightforward with Holman INFINITI. Contact us today if you have any questions, or if you are ready to set up an appointment, you can use our online form.
